Tag Archives: vulners.com

First steps with Docker: installation in CentOS 7, vulnerability assessment, interactive mode and saving changes

Leave a reply

First steps with Docker: installation in CentOS 7, vulnerability assessment, interactive mode and saving changes. Docker and containerization are literally everywhere. IMHO, this changes the IT landscape much more than virtualization and clouds. Let’s say you have a host, you checked it and find out that there are no vulnerable packages. But what’s the point if this host runs Docker containers with their own packages that may be vulnerable? Add to this the issues with complex orchestration systems, such as Kubernetes, completely different DevOps subculture with their own terms, slang, beliefs, priorities, and the situation begins to look like complete IT Hell. 🙂

First steps with Docker

But it seems that Docker will be here for a long time, so we will have to live with it. 😉 Here I will not write what Docker is and how it works. There are many publications about this. I personally interested in what actually we can do with these weird “virtual machines”, how can we run and assess them.

Continue reading →

ISACA Moscow Vulnerability Management Meetup 2018

1 Reply

ISACA Moscow Vulnerability Management Meetup 2018. Last Thursday, September 20th, I spoke at ISACA Moscow “Vulnerability Management” Meetup held at Polytechnic University. The only event in Moscow devoted solely to Vulnerability Management. So I just had to take part in it. 🙂

ISACA VM 2018 Alexander Leonov

The target audience of the event – people who implement the vulnerability management process in organizations and the employees of Vulnerability Management vendors. I noticed groups of people from Altex-Soft (Altx-Soft), Positive Technologies and Vulners.

It was very interesting to see such concentration of Vulnerability and Compliance Management specialists in one place. Questions from the audience were relevant and often concerned the weaknesses of competitors. 😉 Here I will make a brief overview of the reports. You can also read here about previous year event at “ISACA Moscow Vulnerability Management Meetup 2017“.

Talking about the audience, there were fewer people than last year, but still a lot:

ISACA VM 2018 auditorium small

The event was recorded. I will add video here as soon as it’s ready.

upd. Video in Russian. My presentation starts at 1:35:56

The event was conducted entirely in Russian, including all the slides. So, maybe I will make English subtitles and voiceover, at least for my part.

Continue reading →

Potential RCE in Nessus 7 and attacks on Vulnerability Scanners

Leave a reply

Potential RCE in Nessus 7 and attacks on Vulnerability Scanners. A few days ago I saw an interesting youtube video (UPD. 14.05.18 Not available anymore). It is demonstrating the exploitation of the RCE vulnerability in Tenable Nessus Professional 7.0.3. Currently we have very few information about this vulnerability: only youtube video, which is mentioned only on ExploitWareLabs.

Nessus 7.0.3 RCE

While there is no exploit in public access, it’s hard to say how it actually works. It’s also not clear what versions of Nessus are affected. 7.0.3 is the latest version currently. Because of API disabling in Nessus 7 many users are still on 6.11.3. It is not clear whether they are affected or not.

This even can be a fake video. Therefore, I specifically write “potential RCE”. I will update this post when more data is available.

UPD. 14.05.18 In the comments to my post anonymous account Destring Portal posted a comment with the second video of Nessus RCE exploitation and it seems, that it was made by the same author. In this video, the author runs a remote shell on the Nessus host and executes various commands. I will add review of this second video bellow.

Nessus RCE second video

UPD. 10.05.18 Renaud Deraison, Co-Founder and CTO of Tenable, commented on my post at Linkedin:

Our research team studied the video and we have several reasons to doubt its authenticity. We’ve conducted a thorough audit over the last 48 hours based the few details that are in the video and didn’t find anything. We reached out the researcher and instead of replying he removed the video*. We’ll communicate if indeed there is a risk.

In general, you are right though – the security of scanners is of paramount importance. This actually is a topic I’ve been extremely worried about ever since the early days of Nessus. We have a number of security mechanisms in place (interpreted language for the detection scripts, ciphered temporary files, very limited runtime environment) which really aim to limit the risk of being exploited but also to mitigate the risk should the scanner be compromised. I actually did a few talks in the past about scanning “rogue hosts” and we continue to treat all input as hostile.

Again, we’re continuing to investigate the matter and will let you know if we find anything.

* currently video is still available on the same address; it could be probably blocked for some time. (UPD. 14.05.18 Not available anymore)

In any case, it’s a good reason to talk about vulnerabilities of such kind, how they appear and how to protect Vulnerability Scanners from attackers.

Continue reading →

CISO Forum and the problems of Vulnerability Databases

1 Reply

CISO Forum and the problems of Vulnerability Databases. Last Tuesday, April 24,  I was at “CISO FORUM 2020: glance to the future“. I presented there my report “Vulnerability Databases: sifting thousands tons of verbal ore”. In this post, I’ll briefly talk about this report and about the event itself.

CISO Forum 2020

My speech was the last in the program. At the same time, in a parallel stream, there was another interesting presentation by the most famous Russian information security blogger. Thus, there was a real danger of speaking in an empty room. 🙂 But everything went well. There were about 30 spectators and we had an active QA session afterwards.

As I wrote earlier, I started preparing my CyberCentral presentation several months before the event. I did not want to tell the same story again at CISO Forum and PHDays. So I prepared 2 different presentations. At CyberCentral, I was talking about Vulnerability Scanners. And at CISO Forum I was talking mainly about Vulnerable Databases. Of course, I reused some materials, but the accents were different.

Continue reading →

Vulchain scan workflow and search queries

1 Reply

Vulchain scan workflow and search queries. This post will be about my Vulnerability Scanner project – Vulchain. Recently I’ve spent couple of my weekends almost exclusively on coding: refactoring the scan engine, creating API and GUI.

Vulchain scan workflow and search queries

I was doing it because of the conferences, where I will be speaking soon:

Pretty intense schedule for a guy who spends most of his time in PyCharm and Linux console. 😉 Very excited! So, it seemed right to add a couple of slides about my project and show that something is already working.

Continue reading →

Vulners Web Vulnerability Scanner plugin for Google Chrome v. 2.0

1 Reply

Vulners Web Vulnerability Scanner plugin for Google Chrome v. 2.0. Vulners Team released today the second version of their Web Vulnerability Scanning plugin for Google Chrome browser. You can read my description of the version 1.0 at “Vulners.com vulnerability detection plugins for Burp Suite and Google Chrome“.

Vulners web vulnerability scanner v.2.0

Killing feature of Vulners web scanner v. 2.0 is that you can now see all vulnerabilities on all scanned sites in a single window. You don’t need to checks all Google Chrome tabs manually.

Moreover, if some sites make request to other servers, for example googleapis.com, these servers will be checked automatically.

The plugin was fully refactored and now it is React driven. It works faster, analysis more data sources and detects vulnerabilities more accurately.

Continue reading →

Tracking changes in CERT bulletins and Nessus plugins using Vulners Time Machine

Leave a reply

Tracking changes in CERT bulletins and Nessus plugins using Vulners Time Machine. If you use Vulners.com vulnerability search engine, you probably know that it has a real “Time Machine”.

Vulners Time Machine cases

Each time Vulners sees some changes on a source page it creates a new version of security object. And you can see the full history of changes in a nice GUI:

Vulners Time Machine

In most cases, the vendor just corrects typos or adds more details. But sometimes the message can change significantly.

CERT.org

CERT.org Meltdown and Spectre

For example, in a case of latest Meltdown and Spectre vulnerability. Initial cert.org VU:584653 recommendation was “Replace CPU hardware”. 🙂

Continue reading →